Results 1 to 10 of 10

Thread: DWV suspected

  1. #1

    Default DWV suspected

    Got a picture of a bee with what looks like DWV, it's all go here I tell you.
    dwv infected drone.jpg

    I have also included a couple of pictures of my catch tray.
    catch tray 1.jpg

    No signs of Varroa (so far).
    catch tray 2.jpg

  2. #2

    Default

    Our good friend, varroa destructor.... 1 mite in 3 days of monitoring ?
    varroa destructor.jpg

  3. #3
    Senior Member
    Join Date
    Feb 2010
    Location
    Somerset
    Posts
    1,884
    Blog Entries
    35

    Default

    My personal opinion is that the natural mite drop is not a very reliable means, taken in isolation, of gauging the levels of varroa in a colony.

    If you've got a reasonable amount of drone brood in the colony, uncapping around 200 drones in the "purple eye stage" which is around 16-17+ days and counting the mites found would give you a much more accurate idea of what the current mite levels are, especially if you use the BeeBase Varroa Calculator

    How many bees are seeing within the colony with DWV? A couple of bees here or there is normally what starts to set alarm bells ringing in my head that i need to consider doing something or at the very least get a better idea what the varroa levels are.

    In one of my colonies earlier this year I found something similar, though perhaps with more obvious signs of DWV. I took those signs to implement a couple of rounds of Drone brood culling. I had a frame of sealed drone brood which I removed from the colony, let them draw it out again (to more drone brood) and removed that frame when it was sealed. That seems to have brought things back under control and they've bounced back looking healthier over the past couple of weeks.

  4. #4
    Senior Member Jon's Avatar
    Join Date
    Feb 2010
    Location
    Belfast, N. Ireland
    Posts
    5,122
    Blog Entries
    94

    Default

    A guy in my bka said he had no varroa in his colonies and as such did not have to treat. I remember arguing with him last September.
    Come February he had lost 27/28 colonies to a mystery ailment and he brought samples of dead bees from the floor of some colonies for testing.
    It turned out they were riddled with varroa and he didn't know how to look for them.

    And I agree with Nellie. I have colonies which hardly drop a mite all summer but when you start to treat suddenly you get a fall of maybe 750 in a week.

  5. #5

    Default

    The tray under your mesh floor is best if it is sealed in a way that prevents bees,wasps,beetles and other insects from entering.
    Anything that gets in looks for a tasty snack and varroa fits that bill
    Most of the designs sold have a lightweight correx sheet under the mesh which is open to the elements That's maybe ok in winter but pretty useless in the warmer months.
    The best check is to stick some thymol treatment over the bees and see what drops out

  6. #6
    Senior Member Adam's Avatar
    Join Date
    Apr 2010
    Location
    Norfolk East Anglia, South Scotland
    Posts
    962

    Default

    Correx as a mite board is rubbish as it blows about. (Thornes bees on a budget hives). The board should seal reasonably well when thymol is used for varroa treatment - to keep the fumes in. Vasalene spread thinly on the board keeps the mites stuck. I think olive oil also works. Has anyone tried it?

  7. #7
    Senior Member EmsE's Avatar
    Join Date
    Mar 2010
    Location
    Longbenton
    Posts
    404
    Blog Entries
    1

    Default

    I tried the Vaseline but it was a nightmare when trying to scrape the board clean for the next weekly check. I ended up having to take them all home and scrub down with soda crystals. May try the olive oil, sounds much more manageable.

  8. #8
    Senior Member
    Join Date
    Jul 2011
    Location
    Lochaber
    Posts
    124
    Blog Entries
    1

    Default

    Hi Adam. I too bought my hives from Thornes on Bees on a Budget and I too find the correx extremely lightweight. I offered a solution on a similar post yesterday - Absolute Beginners I think it was. My solution is to fix a small piece of wood [ 1"x1" ] centrally to the back of the base with a screw, not too tight. The board is then kept in place by the wood and will only "open " when I want it to on a swivel basis. We get exceptionally strong winds on the West Coast, so I had to think of something ! It works, the board stays in place, its an easy thing to do and costs next to nothing.

  9. #9

    Default

    I am declaring my bees queenless, and I really need to get somebody to look at this hive because it is not healthy, if it smelled I would be contacting FERA. It did not look that bad a few weeks ago. Now after 3 weeks of invalidity due to a surgical procedure and vicious wasp attacks all throughout July have pretty much ended my first foray into beekeeping.

  10. #10
    Administrator gavin's Avatar
    Join Date
    Feb 2010
    Location
    Tayside
    Posts
    4,464
    Blog Entries
    41

    Default

    Sorry to hear it DS. If you can't find a local beekeeper you could post a picture of a brood frame and we'll do our best.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •