Results 1 to 10 of 18

Thread: How to protect new hive?

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Default How to protect new hive?

    OK, I've got bees, but the hive's falling to pieces, so I'm going to treat them to a new one (and I expect some type of appreciation from them ...). How can I protect the hive, what sort of varnish should I use? I've got cuprinol, but have heard that it's not helpful to the bees. Any advice most welcome!

  2. #2
    Administrator gavin's Avatar
    Join Date
    Feb 2010
    Location
    Tayside
    Posts
    4,464
    Blog Entries
    41

    Default

    What is your new one made of? Proper Western Red Cedar and you could leave it untreated. On my cheaper Thornes wood hives I use linseed oil, rubbed over and left to soak in. Some use stronger preservative.

    Thornes now sell a beehive paint which has natural oils and seems bee-friendly.

  3. #3
    Senior Member
    Join Date
    Feb 2010
    Location
    Lindau Germany
    Posts
    705
    Blog Entries
    5

    Default

    i make an emulsion of wax und turps, makes an excellent weather resistant outer coat. I use a heat gun to get it right into the wood.
    or molten wax painted thinly straight on if in a rush to use it + heat gun. Propolis dissolves in alchohol or spititus for coating the inside so they feel right at home inside and out!

  4. #4
    Senior Member
    Join Date
    Feb 2010
    Location
    Somerset
    Posts
    1,884
    Blog Entries
    35

    Default

    I use Cuprinol Shades on my wood hives, a water based, breathable, weather proofing and in a nice range of colours . It's not officially "safe for bees" so use at your own risk but I know a few people who've used it for a number of years and I'm now in my third year without any apparent ill effects.

    As Gavin says, you don't need to treat Western Red Cedar and you definitely shouldn't use Varnish. Whatever you use, it should be breathable, treat the outside surfaces only and I'd leave them for a week or so before sticking bees in to make sure it's dried out properly.

    If you use (Thornes) seconds kit especially it's worth painting everything before you start to put it together, their seconds kit tends not to fit together very well (i've got a couple of boxes I need to take a chisel to this year, ho hum, you get what you pay for etc etc).

  5. #5

    Default

    I use Cuprinol Ducksback which appears to be insect friendly on plywood hives (having sealed edges with wood glue first).

  6. #6
    Senior Member
    Join Date
    Feb 2010
    Location
    Somerset
    Posts
    1,884
    Blog Entries
    35

    Default

    Quote Originally Posted by AlexJ View Post
    I use Cuprinol Ducksback which appears to be insect friendly on plywood hives (having sealed edges with wood glue first).
    I've had that recommended before but was told they'd stopped making it.

    I might be wrong but I understood that Cuprinol were no longer officially describing any of their products as "insect/bee friendly" but that seemed more down to a legislation change (I think) than a change in fomula of the products themselves.

  7. #7

    Default

    Quote Originally Posted by Nellie View Post
    I've had that recommended before but was told they'd stopped making it.

    I might be wrong but I understood that Cuprinol were no longer officially describing any of their products as "insect/bee friendly" but that seemed more down to a legislation change (I think) than a change in fomula of the products themselves.
    Still made as far as I'm aware - fair point EU legislation meant changes to the active ingredients in the paint; they haven't tested the new formulation on beehives and can't comment on it yet. That notwithstanding it keeps out the rain, bees don't turn their nose up at it and they appear healthy enough as always - DYOR Dovya

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •