Page 3 of 3 FirstFirst 123
Results 21 to 24 of 24

Thread: Wax processing - best solution !?

  1. #21
    Senior Member
    Join Date
    Feb 2010
    Location
    Somerset
    Posts
    1,871
    Blog Entries
    35

    Default

    Quote Originally Posted by Mellifera Crofter View Post
    Apart from the poor poly hive having been chewed, Neils, will it withstand all that heat?

    And how is it that the hive got so badly chewed? What make is it?

    Kitta
    i think it should be ok, with a cheap wallpaper stripper type affair can’t see the steam getting that hot.

    it’s a payne’s hive from several years ago, there was no mention of needing to varnish it so i just put bees in it and they very quickly chewed out around the top bars. it’s been a frame store ever since.

  2. #22
    Senior Member Mellifera Crofter's Avatar
    Join Date
    Sep 2010
    Location
    Aberdeenshire, on top of a wind-swept and exposed hill.
    Posts
    1,141

    Default

    I thought it might be a Paynes, Neils. I've had bees gnawing upper entrances for themselves in Paynes hives. I've sold mine now. Please let me know if the hive survived the steam ok - or not.
    Kitta

  3. #23
    Senior Member
    Join Date
    Nov 2016
    Location
    North Yorkshire
    Posts
    134

    Default

    Interesting thread. Been trying a few options myself and seem to have hit upon the reverse approach to Caluna. I take a used jute shopping bag (99p each at LIDL) and tie it like a funnel over a large bucket. (I add water to the bucket first). Wax to be melted on top of jute bag (your filter) and stick in oven at around 80C overnight. Filters most of the crap out and leaves a nice round wedge of clean wax floating on the water. Might want to run through a coffee filter (or similar) afterwards if showing or making candles.
    I've also found that the stuff that comes off from a solar wax melter is good as the crap tends to stick to the slope as the wax and hiney slides down leaving a relatively clean wax block on top of the now bakers honey.

  4. #24
    Senior Member
    Join Date
    Jul 2012
    Location
    Aberdeenshire
    Posts
    500

    Default

    Quote Originally Posted by Calluna4u View Post
    Easiest and cheapest for small quantities. Get a 200litre metal drum. Half fill it with water, put burners underneath and bring to the oil. Shove all your wax into a cloth bag, including a brick or heavy stone. Place it in the drum (can be easier to do this BEFORE you heat the water) and allow it to boil for a couple of hours. Turn off the heat and leave it overnight. In the morning you should have a nice cake of pure wax on top and a bag of slum. Tip it all out and repeat again with another load if you have it to do.

    If the bag is too big and ends up fouling the wax later (not fouling as in contaminating, fouling as in contacting and getting tangle with) you can just stick a couple of heavy things on top to hold the top of the bag down.
    Ive been wanting an excuse to get some burners for a while for homebrewing so this provides the perfect excuse

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •