Results 1 to 6 of 6

Thread: query re removing varroa strips

  1. #1
    Senior Member Bridget's Avatar
    Join Date
    Sep 2011
    Location
    On the edge of a mature pine forest, Kingussie, Inverness-shire
    Posts
    593

    Default query re removing varroa strips

    We didn't get our varroa strips, Amitraz, on till late as the bees were still on the heather end of September. Due to come off next weekend but weather now cooled down a lot and snow on the ground here. One of the strips fell down the middle and is now lying on the floor and I'm wondering if its better to leave it there and not disturb the cluster or is it really important to remove. Normally I would have removed it straight away but my stand in who is during a really good job didn't realise that it was important it hung straight down through the frames.
    Thanks
    Bridget

  2. #2

    Default

    Wire coat hanger in the entrance maybe Bridget

    Sent from my LIFETAB_S1034X using Tapatalk

  3. #3
    Member Wmfd's Avatar
    Join Date
    Sep 2012
    Location
    Peterborough, and into the flatlands to the north and east ...
    Posts
    93

    Default

    Or a grabber, like this?

    http://www.ebay.co.uk/itm/Rolson-61c...25.m3641.l6368

    Not used that one, but have used something similar in the past for a different job,

    David

  4. #4
    Senior Member Bridget's Avatar
    Join Date
    Sep 2011
    Location
    On the edge of a mature pine forest, Kingussie, Inverness-shire
    Posts
    593

    Default

    Quote Originally Posted by Wmfd View Post
    Or a grabber, like this?

    http://www.ebay.co.uk/itm/Rolson-61c...25.m3641.l6368

    Not used that one, but have used something similar in the past for a different job,

    David
    Great little gizmo David, but I think we might need the brain surgeon version with a light on the end and a camera to see what we were doing. Great stocking filler, just wish I could think how it might be useful!


    Sent from my iPad using Tapatalk

  5. #5
    Senior Member fatshark's Avatar
    Join Date
    Jun 2010
    Location
    Ardnamurchan & Fife
    Posts
    1,693

    Default

    I'm not sure how long the strips remain 'active' Bridget. If it's effectively 'all gone' after a month or so it can't do much harm remaining in the colony. However, if activity remains you're effectively leaving a strong selective pressure for resistant mites to develop. I think Amitraz-resistance is reported but not properly characterised.

    I might be tempted to wait until the bees are tightly clustered and then prize the back of the brood box up off the floor, put a wedge of some sort in place and then fish out the strip. It's usually possible to separate the brood box and the floor when it's cold and they're clustered without disturbing the colony if it's done gently. Of course, the setup you use in the bee shed may not make this practical ...

  6. #6
    Member Wmfd's Avatar
    Join Date
    Sep 2012
    Location
    Peterborough, and into the flatlands to the north and east ...
    Posts
    93

    Default

    Quote Originally Posted by Bridget View Post
    Great little gizmo David, but I think we might need the brain surgeon version with a light on the end and a camera to see what we were doing. Great stocking filler, just wish I could think how it might be useful!


    Sent from my iPad using Tapatalk
    With two of you, assuming a mesh floor that the strip is laying on and some space under the hive - one person could lie underneath looking upwards and directing someone else who is semi-randomly probing around with the grabber. Not a great plan I'll grant you!

    Fatshark's idea is more practical, and less likely to end up with physical injury.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •