Page 1 of 2 12 LastLast
Results 1 to 10 of 29

Thread: price of a home made nuc

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Senior Member Jon's Avatar
    Join Date
    Feb 2010
    Location
    Belfast, N. Ireland
    Posts
    5,122
    Blog Entries
    94

    Default price of a home made nuc

    I was given 20 sheets of electoral propaganda correx last week measuring 48" by 32".
    I can make a single 6 frame nuc from a sheet or 4 lids.
    The cost of each is about 3 metres of gaffer tape/duck tape to hold the thing together which is about 28p and two rectangles of 25mm polystyrene which go inside the end bits the frames rest on, probably about 20p worth of polystyrene or you could fish it from a skip if so inclined.
    The polystyrene is optional but I like to push the boat out with regard to extra insulation and quality build!
    So I throw down the gauntlet to you Scots to come up with a cheaper nuc.
    I have one I made 3 years ago which is still going strong.
    I have a template for the body and another for the lid and can assemble a complete box in about 30 minutes.
    The tools needed are a stanley knife or box cutter knife, a tape measure, a biro, a pizza cutter for creasing the correx to make the folds and a piece of timber with a straight edge for folding the correx against.
    correx-nuc..jpg
    This is a prototype from a couple of years back. The current model is more stylish.

  2. #2
    Senior Member
    Join Date
    Mar 2010
    Location
    Nr Stranraer
    Posts
    668

    Default

    Do you put the political blether on the inside or the outside ? If on the outside ,do the bees show political preference?.

  3. #3
    Senior Member Jon's Avatar
    Join Date
    Feb 2010
    Location
    Belfast, N. Ireland
    Posts
    5,122
    Blog Entries
    94

    Default

    I have one I just made where I put the head on the outside.
    I'll post a video on U tube when I have bees in it.

  4. #4
    Senior Member Jon's Avatar
    Join Date
    Feb 2010
    Location
    Belfast, N. Ireland
    Posts
    5,122
    Blog Entries
    94

    Default

    This one has a 2010 mated queen.

    http://www.youtube.com/watch?v=YYhM2-mhDAo

    Admin note: If you insert the URL using the filmstrip icon then it is displayed this way:

    Last edited by gavin; 01-07-2010 at 07:40 PM. Reason: Admin interference

  5. #5
    Senior Member
    Join Date
    Feb 2010
    Location
    Lindau Germany
    Posts
    705
    Blog Entries
    5

    Default

    Nice Nuc.
    Cheapest I have seen is a banana box with polystyrene blocks to hold the frames up.
    The standard banana box size is just perfect for the Zander frames. Perfect is you have bees in a bee house.
    I take it you make the lid out of something porous - so the bees don't sweat in winter / prevent mildew & mold - or do you just lay an old tea towel between the lid and the frame tops?

  6. #6
    Senior Member Jon's Avatar
    Join Date
    Feb 2010
    Location
    Belfast, N. Ireland
    Posts
    5,122
    Blog Entries
    94

    Default

    Quote Originally Posted by Calum View Post
    I take it you make the lid out of something porous
    The lid is made out of the same stuff. There is a 50 mm gap between the top of the frames and the underside of the lid which I intend to fill with fondant and/or insulation.
    Polyhives don't breathe either and bees seem to overwinter fine in them.
    I overwintered several nucs in these last winter although I have them primarily for summer use.
    In winter I tape polystyrene to the front back and top and there is polystyrene inside the two pieces which hold the frames up.
    I have 14 nucs in these contraptions at the moment, 7 with mated queens and 7 still with virgins.
    They have an internal sliding correx frame so they work as anything from a 2 frame mating nuc to a 7 frame nuc ready to be transferred to a full size brood box.
    I use Thorne seconds cedar nationals for my brood boxes but I cannot understand for the life of me why people pay up to £40 for a nuc box when you can make one for 50p.

  7. #7

    Default

    I had some first minister correx in my garage andbput it to use today

    Its for rose frames but it has extra space below for frames with queen cells etc so I believe it to be suitable for nationals too (if needs be in a pinch)

  8. #8
    Senior Member Jon's Avatar
    Join Date
    Feb 2010
    Location
    Belfast, N. Ireland
    Posts
    5,122
    Blog Entries
    94

    Default

    One with Iris would be a collector's item!
    Don't have any Robinson nucs myself.

  9. #9

    Default

    If you want I could swap you a Peter Robinson for a Jim Nicholson?
    It would be just like football stickers at school. .. except the sheets are a wee bit bigger

  10. #10
    Senior Member busybeephilip's Avatar
    Join Date
    Nov 2011
    Location
    Comber, N. Ireland
    Posts
    581
    Blog Entries
    2

    Default

    Do bees from a particular area have a political preference

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •