Page 1 of 5 123 ... LastLast
Results 1 to 10 of 56

Thread: Rose Hives

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Member
    Join Date
    Aug 2012
    Location
    Greenlaw, Scottish Borders
    Posts
    36

    Default Rose Hives

    Hi Everyone,

    So, after 3 years or so, what is the verdict on Rose Hives? Has anyone tried or are using them?

    Would anyone be willing to allow me to visit to see / talk first hand?

    Thanks

    Steve

  2. #2
    Senior Member
    Join Date
    Feb 2010
    Location
    Lindau Germany
    Posts
    705
    Blog Entries
    5

    Default

    Hi

    Here in Germany and more so in Russia hives tend to be a standard size by area: on the continent 'RoseHives'= keeping bees on one size of magazine, is the standard practice .
    Here in S Germany 80% use Zander. This has an advantage that everyones kit is compatable (people buying my colonies can slot them right into their boxes), the suppliers carry only two standard sizes of kit (making everything cheaper due to better bulk prices - my local suppleir just ordered 20000 frames) frames, foundation, are dirt cheap - these are the running costs after purchase. (I pay 1,20 for a frame with foundation)

    So what is the point in supers? Half sized Frames - unless you want to harvest speciality honey on a weekly basis-who has time for that?

    BR
    Calum
    Last edited by Calum; 04-02-2013 at 10:47 AM.

  3. #3
    Senior Member Mellifera Crofter's Avatar
    Join Date
    Sep 2010
    Location
    Aberdeenshire, on top of a wind-swept and exposed hill.
    Posts
    1,190

    Default

    I've read the book, but have no experience of the hives themselves. I decided against the Rose hive because, as far as I know, the frames aren't that easily available apart from Thornes.

    Calum's point of compatibility with neighbours (or even your own hives, if you have other kinds) is a good one. You will be able to fit a National super into your Rose hive and let the bees draw out comb below it, but a National brood frame will be too big. It's ok the other way round.

    Then there's the plywood sides that I don't like. See Nicky's thread called 'Mould'.
    Kitta
    Last edited by Mellifera Crofter; 05-02-2013 at 08:33 AM. Reason: Changed brood 'box' to brood 'frame'

  4. #4
    Member
    Join Date
    Aug 2012
    Location
    Greenlaw, Scottish Borders
    Posts
    36

    Default

    Thanks everyone, appreciated.

    Kitta, I'll check the thread . Thanks

    Steve

  5. #5
    Senior Member
    Join Date
    Feb 2010
    Location
    Somerset
    Posts
    1,884
    Blog Entries
    35

    Default

    I think the principle is fine, but I don't think it requires yet another hive type/frame size to achieve and I think if I were going to go down a one size route I'd either go all Deep National or all Shallow National boxes, any bigger as a solo beekeeper would be too heavy for me I think.

  6. #6
    Senior Member
    Join Date
    Mar 2010
    Location
    Nr Stranraer
    Posts
    668

    Default

    I and a fellow member of our ass'n are making some "Rose" hive boxes at the moment. Same construction as a standard national - but without the fancy joints - Just screwed together and made from western red cedar. These will weigh about half the weight of the boxes made by Thornes from red deal and plywood. We are doing this for evaluation purposes - the Rose system seems most plausible and it will be nice to run some hives without Q excluders. If we "tweak" the design slightly and make the cedar side walls about 1 1/2 mm less in thickness we should be able to get 12 frames ( 35mm wide) in the box. The frames are no problem - just cut down and re-slot standard DN4 side bars to suit.Same thing with the wax.
    Last edited by GRIZZLY; 12-02-2013 at 05:37 PM.

  7. #7

    Default Re: Rose Hives

    If I have bees after this eternal winter I will happily share how this year goes on the rose hives.

    Let's hope aslan is on the move

    __________________
    sent via tapatalk

  8. #8

    Default Re: Rose Hives

    I don't think it is the box that matters. I think the method can be applied to most hive types. If I were to do this method, I would use national poly deeps. If you sell nucs it would be less likely to cause problems and is also a much better material than ply. More expensive but will save money over the years by lasting longer and better yields.

    Sent from my XT615 using Tapatalk 2

  9. #9

    Default Re: Rose Hives

    Fair point Ely.. the weight of the poly would be perfect for the rose method if using nationals (wouldn't fancy it in cedar) probably would have been my choice if I wasn't so keen to make mine, and be the bin hoaker that I am, using second hand materials were possible

    But the methods are just something else in my arsenal, if I want to follow more traditional methods I am free to... We have to do what suits our own situations

    __________________
    sent via tapatalk

  10. #10

    Default Re: Rose Hives

    I agree. I doubt anyone follows any book to the letter. It's nice to learn and implement what suits to make things easy

    Sent from my XT615 using Tapatalk 2

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •