Draw-wing help please

Attachment 1404Hi all

I'm trying to work out how to use Draw-wing and there's a paucity of resources on the web it would seem. I'm a complete novice and have had this sample sitting in the freezer since last summer. I've attached a jpg version of the scan I took at 2400dpi - I have a gigantic bmp file of the same but the version you see here has been darkened a bit to give a greater contrast between light and dark.

When I try to get Draw-wing to attach its points to the wings ("Apis Junctions") it's only picking up one wing from the image instead of the 20 I have scanned. I'm trying to get it right with this scan before I scan enough for a proper sample. I have Morphplot sitting waiting for when I do.

Any suggestions?

Put a tick in the 'step by step' box
Go to 'file' 'open' and open your scan
Select 'wing' and 'apis junctions dir...'

It should all follow on from there.
You might have to move some points as it misses the odd one.

Did you scan by transmitted light, i.e. in filmstrip mode. Your image looks like it was scanned by reflective light.

Please read and follow the instructions in MorphPlot precisely.

Attachment 1405

That's my setting for the V330 if the scan is the issue

Errr...I don't know Peter. I have a Canon Pixma MP620 and I don't think I have that option. I looked again at the Morphplot instructions and tried again. Used the step by step mode and suddenly realised that if I clicked "next step" another wing image was picked up. Doh!:rolleyes: So in the end Draw-wing picked up 17 of the 20 wings on my scan.

For all the good it did me. It's not looking so good as you'll see from the scattergram on the 2D plot thread. It looks like they're pretty hybridised - which is a shame as I grafted from that queen last summer. Still you have to start somewhere.

Oh one other thing. Although Draw-wing was picking the individual wing images it wasn't placing the points on them. I had to manually do that for all 17 images which took bleedin ages!

Sounds like a scanning issue. If you are scanning by transmitted light then DrawWing will not work.

You will get quicker at placing/correcting points manually. Again,follow my suggestions in MorphPlot.

Hi friends of morphometry,
I have here a comparison of two measurement systems.
Wings 1: mother copulated in Virelles / Belgium
Wings 2: daughter (F1) copulated in Hamm / Germany.
Strangely, the high share of mellifera Rigional pairing.
Regards, Horst

Attachment 1407

Attachment 1408
PS. work with transparency scanner at 3200 dpi. It is a very good workmanship of the wings in the slide frame, behind glass.

This is the sort of quality I'm getting with my scanner (image of this wing extracted by Draw-wing). Is this ok?

Attachment 1409

Hi Drumgerry
you probably have this sorted now but just in case
There are loads of reflections on the wing sample scan --that isn't good
Secondly the scanner you are/were using is a CIS type not CCD
CIS scanners typically have a very shallow depth of field which is ok for documents but not for objects
And as already mentioned a transparency scanning mode is likely to be needed
I don't do wing scanning so the last point might be overkill
Here's the Canon spec http://www.canon.co.uk/For_Home/Prod...x.aspx?specs=1

]

This is quite a good page on scanner technologies http://www.imageaccess.de/?page=Whit...elRace&lang=en

DR it turned out fine in the end and I was able to get sufficient detail in the scanned image with my scanner - where Draw-wing wasn't able to place the points in the right spots I managed to do it manually with a bit of guidance in the main scanned wings thread. Only had the one sample to do in the winter but with the new season just around the corner I'll be taking a few samples from my own and other people's bees to get a bit more practice in.

That's great news
These things are not blooming cheap
I used to work for Canon at one time and loyally bought an Epson Lol!!
(it works with Linux)
If you ever buy another one a CCD is more forgiving
Sleet here today again

It's a great printer as well so I was reluctant to buy another if the Canon could be made to function which thankfully it was.

Had about 2-3 inches of snow overnight but it has shifted quickly and there's not a lot left on the ground now!

I feel better about the sleet now :)

This chap claims he knows you ??

Attachment 1484

Surely there is no need for points numbered 1 -19 ?
6 would be boring enough to organise and check
sorry 0 -18 :)

DrawWing was designed for geographic morphometry (where the shape of the whole wing is measured). It just happens to identify the points that we need for standard morphometry.
We need 0, 1, 2, 3, 4, 6, and 18 (and 5 if you want the Hantel index).

Hi Peter
Thanks a lot, that will save my eyesight
I'll only correct those 7 points in future

Winter is coming there should be dead bees aplenty on the floor
good opportunity to practice your wing plots ??

Quote:

---

Originally Posted by The Drone Ranger

Winter is coming there should be dead bees aplenty on the floor
good opportunity to practice your wing plots ??

---

Not really. You need young bees from the centre of the brood nest so that you can be sure they came from that queen.

Dead ones could be drifters - or robbers from another hive.

point taken Peter but they still make practice subjects I guess

Spring would be the best time before any drifting and when all the bees are sure to belong :)

Quote:

---

Originally Posted by The Drone Ranger

point taken Peter but they still make practice subjects I guess

Spring would be the best time before any drifting and when all the bees are sure to belong :)

---

Hmmm. So what about bees that drifted in the previous autumn. And there is no drifting in the spring? I think not.

Taking them from the centre of the brood nest is the only way to be sure. Give the comb a gentle shake to remove the older bees and then take your sample from those that remain. Why do all the morphometry work if you cannot be sure that the bees came from that queen?

Best wishes

Peter

Peter.
If you take a sample from the floor and take a sample from the brood nest you will find there is a pretty good correlation.
I have also found that a colony produces a similar scattergram if sampled several times over a period of years irrespective of any seasonal drifting.
For several years now the Bibba magazine has been full of well intentioned articles about the accuracy of sampling techniques, but the elephant in the room is whether there is actually a good correlation between wing pattern and underlying DNA. If not, the arguments about sampling from the floor or from the brood nest are not that relevant.
Cart before the horse.

Wing venation will indicate a hybrid fairly clearly but it may not tell you much about whether the colony tested is pure race especially if you have been sampling wings over a period of years and using that information as part of the selection process. It is quite conceivable that you could get a scattergram with all the points in the correct quadrant which turns out to have mixed genetics.

What does produce very inaccurate results is sampling too soon after a colony has been requeened. Even after 3 months you still have bees from the previous queen present.

Could be wrong but I think winter bees are laid purposefully by the queen
Any foragers or flying bees from this year will be dead by next spring (on the floor right enough)
That's why September on is so important laying wise
Drifting also depends on flow because empty handed bees are unwelcome when the turn up at the wrong door :)

Quote:

---

Originally Posted by The Drone Ranger

Drifting also depends on flow because empty handed bees are unwelcome when the turn up at the wrong door :)

---

I'm not sure how true that is.
Certainly bees bringing forage will mostly be very welcome, but even with nothing to offer I think most healthy bees will get assimilated if they arrive with a non aggressive demeanor.

Quote:

---

Originally Posted by mbc

I'm not sure how true that is.
Certainly bees bringing forage will mostly be very welcome, but even with nothing to offer I think most healthy bees will get assimilated if they arrive with a non aggressive demeanor.

---

I'll be testing the theory at all the bring a bottle parties this new year :)

Make sure it's not a bottle of Buckfast.

[QUOTE=Jon;22146]Peter.
>Wing venation will indicate a hybrid fairly clearly but it may not tell you much about whether the colony tested is pure race especially if you have been sampling wings over a period of years and using that information as part of the selection process.

>It is quite conceivable that you could get a scattergram with all the points in the correct quadrant which turns out to have mixed genetics.

Seems to me that the first statement contradicts itself and that is re-inforced by the second.

>the elephant in the room is whether there is actually a good correlation between wing pattern and underlying DNA.

Yes - and this was something that the money from the Co-operative was supposed to resolve, but has so far failed to do - spectacularly!
However, we should perhaps remember that the Galtee group started by using wing morphometry; I seem to recall that those schoolgirls analysed 21,000 wings - and more than earned the top prize for their work.
Of course, none of us are claiming that wing morphometry is sufficient alone, but it served Galtee members well - and it would appear to have worked for me too.

Quote:

---

Originally Posted by The Drone Ranger

>Spring would be the best time before any drifting and when all the bees are sure to belong :)

---

Define spring!

[QUOTE=Peter;22152]

Quote:

---

Originally Posted by Jon

Seems to me that the first statement contradicts itself and that is re-inforced by the second.

---

Not at all.
Check out the Moritz paper!

Once you start using wing morphometry as part of a bee breeding programme it starts to lose its value.
Moritz recommends discarding it as a selection method or switching to a different set of morphometric variables after a few generations.
This paper is critical to understanding wing morphometry limitations.
The more it is used the less predictive it becomes.
As a snapshot of a population of bees which have never been selected, it should be quite useful.

Quote:

---

However, we should perhaps remember that the Galtee group started by using wing morphometry

---

The wing morphometry survey started about 5 or 6 years ago and the Galtee breeding programme has been going more than 20 years.
DNA microsatellite analysis is getting cheaper every year so this is going to make the wing morphometry redundant in the long run anyway.

Quote:

---

Originally Posted by Peter

Define spring!

---

Hi Peter
I would say March round these parts but lucky people further South might have them flying earlier