PDA

View Full Version : aggressive colony



wheresthedog
14-05-2016, 04:55 PM
Hi all,

Could I get some advice on requeening an aggressive colony please. The colony we'd like to change is bad tempered and guard bees will follow us for some distance and time after the hive has been closed back up. I'm new to beekeeping but can rule out beginners handling because our other colony is much more mild mannered.

I'd like to requeen the problem colony and would love some advice on the best course of action please.

There are eggless queen cups in both hives. Could I try and graft a young larvae from the mild colony into a queen cup in the problem colony and kill the problem colony's queen or should I wait for a queen cell to appear in the mild mannered hive and transfer that to the problem colony?

Any help much appreciated.

wheresthedog
14-05-2016, 05:03 PM
(thinking about it, is the only real option getting a mated queen from someone else as a new queen of my making may well mate with bad tempered drones keeping the colony unchanged?)

The Drone Ranger
15-05-2016, 12:40 AM
Hi wheresthedog

I am going to guess that if the bees are all bad then the fault lies with the queen
So if you raise a queen from her there is a fair chance it will produce ill tempered bees as well
Drones are a bit of a lottery and unless you are in a very isolated spot you cant influence them
The good news is you have one gentle colony, so that's where your next queen should come from

If you are feeling brave or have a very good beesuit and smoker find the bitch queen and squash her
If there is drone brood remove it
After 5 days or so go through the bad hive and squash every queen cell make sure you get them all
Put a frame from your good hive into the bad one
That frame should have eggs and very young larva
After a few days just check for queen cell on the introduced frame
You can reduce them down to one or two good open ones of the same age
Check they haven't made any cells on the other frames (squash them)

Put the kettle on and get the Anthisan out

There are lots of other ways but that's the way I would go :)

wheresthedog
15-05-2016, 08:59 AM
Thanks Mr Ranger that's very helpful and sounds like the best methods for a beginner.

Might I ask a couple more questions - we have varroa present already and have commenced treatment with apilife var. I only put the first strips in yesterday - should we wait until after the 4 week treatment is completed before requeening do you think?

Should I put the introduced frame of eggs and larvae from the good hive into the bad one at point of squishing the old queen or 5 days after?

The Drone Ranger
15-05-2016, 10:15 AM
Not sure on the apilife var front whether that can stay in
Thymol won't harm new larva so probably ok

What I definitely wouldn't do is wait 4 weeks
If you have the weather I would do it now

The idea is once the bad queen is out and squished
The hive will make queen cells
They will pick very young larva

After 5 days those queen cells are easy to spot (usually)
So we squash them before we get another bad queen

Once the cells are squashed we give them the frame from your good hive
They will find young lava and raise cells on it

We wait again about 5 days have a look in to make sure that has happened
But we also check the rest of the frames because if there were eggs on them
Those eggs will have have hatched and if there are any suitable larva the bees will raise queen cells on them as well (we definitely don't want that)

We reduce all the queen cells down to one (normally)
That's to stop swarming
If there are more than one cell the first virgin should kill any others but we are still in the swarming season so she might leave with half the bees instead (you might not mind that in this case though lol!)

So you can see you want to put your good frame in 5 days after you squash the old queen cells
John



Sent from my LIFETAB_S1034X using Tapatalk

wheresthedog
15-05-2016, 10:39 AM
Thank you sir (or M'lady) that's crystal clear.

One last question - do you have any advice regards the unpleasant task of dispatching the old queen?

Is it find her, pluck her off the frame, put her on a piece of wood and..........squish fast with a hammer in the vicinity of the hive or should it be done with more ceremony away from the colony?

Mellifera Crofter
15-05-2016, 11:50 AM
... put her on a piece of wood and..........squish fast with a hammer ...

She's not a mouse! I quickly squish her thorax with thumb and forefinger (wearing latex gloves) - but I've only very rarely had to do that, for example, drone layers. I even keep my aggressive queens. Their moods can change and they can become absolutely calm and no problem at all.
Kitta

wheresthedog
15-05-2016, 12:34 PM
She's not a mouse!
Kitta

Haha!! That made me chuckle - I was going for swiftness of death!

2Bee
17-05-2016, 07:48 AM
we have varroa present already and have commenced treatment with apilife var. I only put the first strips in yesterday -

Hi,
New here as well, although not new to beekeeping.
Varroa is pretty much always present nowadays in each hive. So, the question is how many are there? There will be a time, when your hive is without brood, when you re-queen your aggressive hive. This means a big cut in the mite's life cycle and a perfect opportunity to treat. When your new queen is mated and just started to lay eggs (you will be excited to see that!) you could treat them with a trickle of oxalic acid or spray them (lactic acid works as well). I often cage the new queen and keep it in my pocket for the treatment, then allow her back shortly after. As you are a beginner, it would be good to get help from your local association as well.

Adam
19-05-2016, 03:06 PM
I would not want to make a bad-tempered colony queenless as they could be much worse. My suggestion;

Move the colony 3 - 6 feet to one side. On the old site place a brood box on a floor. The flyers will return to that spot. Leave for a while of you wish to allow more to do that and then locate the queen. Put her on her frame in the new BB on the old site. Fill up with foundation or comb as you have it; you could add a couple of frame of brood if you wanted; you have now created an artificial swarm with the (more stingy) older bees with the queen. Give them the supers. The remaining colony will be queenless (and may need feeding as it will have little food and no foragers).

After 6 or 7 days, you can move the queenless colony to the other side of the Q+ one to bleed off more flyers first, but open upp, ensure you remove anything that looks like a queencell and then add a frame of eggs& young larvae. With lots of young bees the colony should make a good job of making queencells. Allow one to emerge and she should mate. Once she has mated you can let her lay for 2 - 3 weeks before uniting and releiving the other colony of the bad-tempered queen.
A slower process but safer....

Neils
19-05-2016, 07:51 PM
Some good options either way, but if you've got the spare kit I think I'd go with Adam's suggestion to split the colony and keep bleeding the flying bees off the hive that'll have the new queen.

wheresthedog
19-05-2016, 09:17 PM
All advice much appreciated ladies and gents. Very helpful